![]() ![]() you can select the frequency of the calibration output between 50 Hz and 100 kHz instead of only 1 kHz and you have a real working one-channel-mode (CH1 only) with high sample rate of 30 MHz _without_ dropping a lot of samples (due to the USB timing you can not transmit two channels with 30 MSamples or more (this is described in the "big 6022 thread": ) Martin P.S. Development OS is Debian Linux, but the program also works on. While in Windows, insert the installation CD into. OpenHantek6022 is a DSO software for Hantek USB digital signal oscilloscopes 6022BE / BL. Hi Cliff, just follow the advice of raxis13 and use Zadig: If you want to use OpenHantek6022 (that is using libusb as low level driver) the Original Hantek driver does not work because OpenHantek6022 uses an improved firmware with additional functions that the old Hantek driver does not support. Hantek 6022BE 1.2 Install Software Caution: You must install the software before using the oscilloscope. First, we need to install the driver, so we need to connect the Hantek 6022BE to the PC, a bus-powered USB device. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |